Shop Inspection
MOSTECH is focused on technical inspection service.
The most requested service is the inspection of materials, mechanical and electrical equipment at workshop.
These assignments are carried out as residence, semi-residence or spot basis ("on call"), as per client’s requisition.
MOSTECH complies with internal rigorous procedures with an approach to the excellence: meticulous work and well detailed reports are our distinctive.
These types of services are subjected to the tightly follow up of an ITP, which establishes the procedures, standards or specifications to comply for testing and defining the acceptance criteria.
Through these services, we make certain that equipment satisfying our customer’s quality need is provided on a timely basis.
A. PLANS
- Interpretation of specification and standards
- Advice on quality control methods
- Determination of inspection and test procedures (through pre-inspection meeting)
- Arrangement of work schedules
B. TESTING AND CHECKING OF MATERIALS
Determining the conformity to requirements of physical, chemical and other technological properties of all types of materials used in the fabrication of equipment. Documented test results are then compared with contractual specification and specified codes and standards. The choice of the operations to be performed depends on the requirements of the assignment and include:
- Verification of test reports and identification of mill material certificates.
- Witnessing of tests performed by others.
- Performance of tests in laboratories.
C. WELDING INSPECTION
The object of this service is to verify welding operations in manufacturer’s shops and/ or site that all welding operations are executed in accordance with contractual specifications and specified codes and standards. The choice of operations to be performed depends on the requirements of the assignment and may include:
D. DIMENSIONAL CHECKING
Verifying all dimensions which have specified tolerance. The results of the verifications are compared with manufacturing drawing, contractual specifications, specified codes and standards for their conformity to the requirements of such specifications.
E. WITNESSING OF PERFORMANCE TESTS
Witnessing performance tests of complete machines or equipment and verifying test results including measured data, corrected data and calculated performance values which are compared with the applicable specifications to ascertain their conformity to the contractual requirements.
F. VISUAL INSPECTION BEFORE SHIPPING
Examination of finished components before packing for general condition and conformity with the applicable specifications, technical characteristics, the number and location of accessories, surface finish, cleanliness, verification of quantity and weight and general condition of paint and other protective coatings. This inspection is normally accomplished for all accessible parts without necessitating disassembly operations.
G. PACKING AND MARKING INSPECTION
The object of this service is to verify the packing material and its marking for its conformity with the specifications. The typical operations performed are
- Identification of material or equipment before packing and checking its conformity with the specifications.
- Verification of the protection of packed equipment against humidity, distortion and other source of damage.
- Verification of the conformity of packing material with the contractual specifications and with accepted practice.
- Checking that the equipment its secure within the package.
- Verification of the conformity of marking with the contractual specifications and the handling requirements.
- Verification of the correct issue of documents such as packing lists, bills of landing, customs declarations.
- Additional inspections and testing can be performed to confirm the suitability of packing materials to withstand transportations, loading and unloading operations.
H. PRE-SHIPMENT INSPECTIONS
Pre-Shipment Inspections is offered to exporters from the Korea and comprises a detailed inspection of equipment or materials after manufacture but prior to shipment.
The scope includes Quality (conformance to specification), Quantity, Packing & Marking and Supervision of Loading.
A Certificate of Inspection can be provided against a Letter of Credit and authorized by a Chamber of Commerce.
I. EVALUATION
- Reports
- Analysis of inspection and test results
- Advice on improvements
The most requested service is the inspection of materials, mechanical and electrical equipment at workshop.
These assignments are carried out as residence, semi-residence or spot basis ("on call"), as per client’s requisition.
MOSTECH complies with internal rigorous procedures with an approach to the excellence: meticulous work and well detailed reports are our distinctive.
These types of services are subjected to the tightly follow up of an ITP, which establishes the procedures, standards or specifications to comply for testing and defining the acceptance criteria.
Through these services, we make certain that equipment satisfying our customer’s quality need is provided on a timely basis.
A. PLANS
- Interpretation of specification and standards
- Advice on quality control methods
- Determination of inspection and test procedures (through pre-inspection meeting)
- Arrangement of work schedules
B. TESTING AND CHECKING OF MATERIALS
Determining the conformity to requirements of physical, chemical and other technological properties of all types of materials used in the fabrication of equipment. Documented test results are then compared with contractual specification and specified codes and standards. The choice of the operations to be performed depends on the requirements of the assignment and include:
- Verification of test reports and identification of mill material certificates.
- Witnessing of tests performed by others.
- Performance of tests in laboratories.
C. WELDING INSPECTION
The object of this service is to verify welding operations in manufacturer’s shops and/ or site that all welding operations are executed in accordance with contractual specifications and specified codes and standards. The choice of operations to be performed depends on the requirements of the assignment and may include:
-
Reviewing of manufacturer’s shop instructions against contractual specification and specified codes and standards.
-
Witnessing of welding procedure qualification test
-
Witnessing qualification tests of welders and welding operators.
-
Checking that the necessary welding instructions have been issued by the manufacturer.
-
Checking that all welding operations are being performed in accordance with the instructions issued. Such instructions can cover the type of electrodes to be used, joint preparation and fit-up before welding, preheating requirements, location and sequence of welding passes, completion of intermediary operations such as back chipping, grinding, and cleaning, and post weld heat treatment.
-
Checking the type and condition of the electrodes employed.
-
Examination of the welding equipment.
-
Witnessing of destruction and non-destructive test.
-
Interpretation of non-destructive test results.
-
Dimensional and visual checking of the welded items and of the welds.
-
Performance of the destructive and non-destructive test.
D. DIMENSIONAL CHECKING
Verifying all dimensions which have specified tolerance. The results of the verifications are compared with manufacturing drawing, contractual specifications, specified codes and standards for their conformity to the requirements of such specifications.
E. WITNESSING OF PERFORMANCE TESTS
Witnessing performance tests of complete machines or equipment and verifying test results including measured data, corrected data and calculated performance values which are compared with the applicable specifications to ascertain their conformity to the contractual requirements.
F. VISUAL INSPECTION BEFORE SHIPPING
Examination of finished components before packing for general condition and conformity with the applicable specifications, technical characteristics, the number and location of accessories, surface finish, cleanliness, verification of quantity and weight and general condition of paint and other protective coatings. This inspection is normally accomplished for all accessible parts without necessitating disassembly operations.
G. PACKING AND MARKING INSPECTION
The object of this service is to verify the packing material and its marking for its conformity with the specifications. The typical operations performed are
- Identification of material or equipment before packing and checking its conformity with the specifications.
- Verification of the protection of packed equipment against humidity, distortion and other source of damage.
- Verification of the conformity of packing material with the contractual specifications and with accepted practice.
- Checking that the equipment its secure within the package.
- Verification of the conformity of marking with the contractual specifications and the handling requirements.
- Verification of the correct issue of documents such as packing lists, bills of landing, customs declarations.
- Additional inspections and testing can be performed to confirm the suitability of packing materials to withstand transportations, loading and unloading operations.
H. PRE-SHIPMENT INSPECTIONS
Pre-Shipment Inspections is offered to exporters from the Korea and comprises a detailed inspection of equipment or materials after manufacture but prior to shipment.
The scope includes Quality (conformance to specification), Quantity, Packing & Marking and Supervision of Loading.
A Certificate of Inspection can be provided against a Letter of Credit and authorized by a Chamber of Commerce.
I. EVALUATION
- Reports
- Analysis of inspection and test results
- Advice on improvements